Compare our Car Seats
From the first ride home to school carpools, find the UPPAbaby® car seat that fits your child at every stage. For a full car seat comparison, download the Car Seat Comparison PDF (3Mb).
Mesa®Infant Car Seat |
Aria®Infant Car Seat |
Rove™Convertible Car Seat |
Alta®Booster Car Seat |
|
|---|---|---|---|---|
| Best For | Everyday Comfort & Easy Loading | Lightweight Carry & Added Stability | Rear- & Forward-Facing Growth | Big Kid Comfort & Support |
| Recommended Use | Approx. 0 to 1 years | Approx. 0 to 1 years | Approx. 1 to 6 years | Approx. 6 to 10 years |
| Weight / Height Range | 4 to 35 lbs, up to 32" (whichever comes first) | 4 to 22 lbs, up to 32" (whichever comes first) | Rear-facing: 14 to 50 lbs (Comfort Inlay: 14 to 20 lbs) Forward-facing: 30 to 65 lbs, up to 49" |
40 to 100 lbs, up to 57" |
| Weight | Carrier: 9.9 lbs; On base: 18.9 lbs | Carrier: 6 lbs; On base: 12.6 lbs | 25.2 lbs | 17 lbs |
| Dimensions | Carrier: 25.8" L x 17" W x 23" H On base: 28" L x 17" W x 25" H |
Carrier: 25.8" L x 17" W x 23.7" H On base: 28.8" L x 17" W x 25.2" H |
22.9" L x 18.9" W x 25.7 to 33.7" H | 20" L x 17.5" W x 25.5 to 33" H |
| Installation System | SmartSecure® | SmartSecure® | SmartSecure® | SecureFit™ belt routing |
| 5-Point No-Rethread Harness |
|
|
|
Uses vehicle seat belt |
| Load Leg |
|
|
Infant Seat Feature | Infant Seat Feature |
| Anti-Rebound+ Panel |
|
|
Infant Seat Feature | Infant Seat Feature |
| Meets FMVSS 213a & 213b |
|
|
|
|
| Adjustable Headrest | 25 positions | 25 positions | Active Support | 7-position active support |
| Newborn Support | Infant insert | Two-piece infant insert | Comfort Inlay (14 to 20 lbs) | Not intended for babies |
| Fabric (free of fire retardent chemicals) | SafeTech™ | DualTech™ | DualTech™ & PureTech™ | SafeTech™ |
| Canopy | UPF 50+ with mesh ventilation & peek-a-boo window | UPF 50+ with back ventilation |
|
|
| Stroller Compatibility | Vista, Cruz & Kona; Minu & Ridge with adapters | Vista, Cruz & Kona; Minu & Ridge with adapters | Infant Seat Feature | Infant Seat Feature |
| FAA-Certified for Travel |
|
|
|
Not applicable |
| Magnetic Buckle Holder |
|
|
|
Uses vehicle's seat belt |
| Also Includes | Car seat base, multi-adjustable carry handle | Car seat base, multi-adjustable carry handle | Spring-loaded lock-off doors, multi-directional tether, energy-absorbing EPP foam, removable cup holder | Rigid LATCH connectors, multi-position recline, elevated armrests, removable cup holder |
| Shop Car Seats |
Disclaimer: Proper fit and installation are crucial to your child's safety. Recommended use periods are guidelines. Always refer to your car seat manual for weight and height requirements.
Get Help with Fit & Installation
Selected FAQs
Are the harness pads required on the Mesa?
The harness pads are optional. They may need to be removed when using the Mesa with a smaller child to achieve proper harness tightness and chest clip placement.
What if you can’t find a proper angle when installing the Mesa?
If a proper angle cannot be achieved with the adjustable foot, a rolled towel may be used.
When do I transition my baby out of the Mesa?
UPPAbaby recommends transitioning your child out the Mesa V2 by their first birthday or the 1-inch rule, whichever comes first. The 1-inch rule is applied when your child is using the headrest in its highest position and when the top of their head is less than 1-inch from the top of the headrest structure. Please note that transition should also occur when your child meets the 35 lb weight limit.
Can I use a vehicle protector mat?
Our TravelSafe Program takes the stress out of air travel by ensuring your UPPAbaby gear is fully protected. Simply purchase a Travel Bag and any damages during air travel are fully No, UPPAbaby does not allow vehicle seat protectors with their car seats because they haven't been tested or approved for use. The car seat base has a finished bottom to prevent vehicle seat damage.